Connecting Your "Stb - Samsung DCB-P850Z(S) Instructions For Use Manual

1. LOCATION OF THE RECEIVER
Your receiver should be placed under proper ventilation. Don't put in completely
enclosed cabinet that will restrict the flow of air, resulting in overheating.
The location should be safeguarded from direct sunlight, excess moisture, rough
handling or household pets. Avoid stacking other electronic components on the top of
the receiver. The location should be safely accessible by the cable from your antenna
system.
2. CONNECTING THE RECEIVER WITH CABLE SYSTEM
After installing your cable system, connect the coaxial cable to "ANT IN" terminal
marked at the rear of the STB.
All cable connectors should be finger tightened; do not use any kind of wrench while
tightening connectors. The cable should be 75 ohm impedance coaxial cable.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use the following methods; Via
SCART cable, RF cable or RCA cable. Connect the RF cable to the terminal marked "RF
OUT" on the rear panel of STB and its other end to the TV RF input socket. In here, "RF
OUT" means the loop through.
In the case of connecting your TV through SCART cable, connect the SCART
connector marked AV1 (TV) to the respective SCART port on the TV.
4. CONNECTING YOUR VCR or DVD PLAYER
To connect a VCR or DVD player, the STB has been provided with SCART at the
rear marked "AV2 (EXT)." Using a SCART connector, the VCR or DVD player can be
connected to the receiver.
5. CONNECTING EXTERNAL AUDIO / HI-FI SYSTEM
To connect any external Audio Hi-Fi system, the receiver has been provided with two
RCA connectors at the back of the receiver, marked with AUDIO L and R respectively
to connect the left and right Audio.
6. CONNECTING DIGITAL AUDIO SYSTEM
Connect a fiber optic cable between OPTICAL on the receiver and OPTICAL on the
Digital Audio System.
7. INSERTING SMARTCARDS FOR CONAX SERVICES
In order to view a scrambled service, you need to have a valid Smartcard.
This STB has embedded the Conax to view Conax programmes.
Insert the Smartcard with the gold coloured chip facing downwards.
DCB-P850Z,P850ZS(GB).indd 6

CONNECTING YOUR "STB"

GB-
2008-09-05 오후 3:13:18