Table of Contents
Advertisement
Exit: To exit the Web Management Utility.
View TAB
In the "View TAB", there are view log and clear log function, this
function will help you to show trap setting:
View Log: To show the event of the Web Management Utility and the
device.
Clear Log: To clear the log.
Option TAB:
In the "Option TAB", there are Refresh Time function, this function
helps you to refresh the time of monitoring the device. Choose 15 secs,
30 secs, 1 min, 2 min and 5 min to select the time of monitoring.
Help TAB
In the "Help TAB", there is About function, it will show out the
version of the Web Management Utility.
Configuring the Switch using Web Browser
All software functions of the DES-2108 can be managed, configured
and monitored via the embedded web-based (HTML) interface. The
Switch can be managed from remote stations anywhere on the
network through a standard browser such as Netscape Navigator or
Microsoft Internet Explorer. The browser acts as a universal access
tool and can communicate directly with the Switch using the HTTP
protocol. The Web-based management module and the Console
program (Telnet) are different ways to access the same internal
switching software and configure it. Thus, all settings encountered in
web-based management are the same as those found in the console
program.
24
Advertisement
Table of Contents
