Support For Association Groups - Z-Wave ZTS-110 User Manual

Delete (Exclude) ZTS-110 from Gateway / Controller Z-Wave
network
Step Procedure / Description
Gateway / Controller device should be set to
Exclusion mode.
Press and hold "Home" key for 2 seconds
1
to set ZTS-110 to Add (Inclusion) / Delete
(Exclusion) Mode.
Press "Prog" key once, it will search the
2
network.
If the ZTS-110 is removed from the network,
it shows no connection. Exclusion is
3
completed.
Press "Home" key once to go back to the
home page.
4
will appear on the main display.
Support Association Groups (Association Command Class)
ZTS-110 supports 3 association groups.
Association group
Mode
Heating mode
Cooling mode
OFF
Association group_1
(Heat pump)
ON
(basic set command 0xFF)
OFF
(basic set command 0x00)
OFF
(basic set command 0x00)
30
LCD indication
MO WAKE
AM
PROG ON
FAN AUTO
Association group_2
(Compressor)
(basic set command 0x00)
(basic set command 0xFF)
(basic set command 0x00)
OFF
OFF
ON
OFF