Table of Contents
Advertisement
Using the LCD Monitor
The LCD (Liquid Crystal Display) monitor
can be used while recording.
180°
90°
If you adjust the LCD Brightness or
colour.
1 Press MENU to display the main menu
screen.
2 Rotate JOG KEY to select
SETTING
from the main menu screen
(pages 21, 23).
3 Press JOG KEY to display the LCD
SETTING screen.
4 Press JOG KEY to select BRIGHTNESS
or COLOR, then rotate JOG KEY to
adjust them.
5 Press MENU twice to exit this mode.
Self Recording
100-K.28-33.p65
LCD-OPEN
Button
LCD
180°
29
Camera Recording
Before you begin...
• Connect the Palmcorder to a power source
(pages 10, 11).
• Insert a cassette with record tab closed
(page 13).
1
Press LCD-OPEN to unlock the LCD
monitor.
2
Swing the LCD monitor fully open
and adjust the angle.
• The LCD monitor will automatically
turn on.
• When the LCD monitor is completely
closed, it will shut off automatically to
save power.
• Adjust LCD Brightness and/or colour
of the LCD monitor if necessary.
3
Start recording (page 28).
Note
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
L C D
S E T T I N G
LCD
B R I G H T N E S S
L OW
H I G H
LCD COLOR
H I G H
L OW
:
SELECT
PUSH
JOG KEY
S E T
:
R OTAT E
JOG
KEY
E X I T
:
PUSH
MENU
KEY
Rotate the LCD monitor 180 degrees so
that it faces in the same direction as the
lens, while in the CAMERA mode, to record
yourself.
The picture in the LCD monitor will appear
reversed.
Set
SELF-REC
to MIRROR (page 21) on
the Camera mode menu screen to see the
picture as it is actually being recorded.
00/06/14, 11:55
29
Advertisement
Table of Contents
