Panasonic Digital Palmcorder PalmSight PV-DV100-K Operating Instructions Manual page 61

If you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
Symptom
No picture in the EVF or LCD Monitor ...
Video cassette can't be inserted ...
Video cassette can't be removed ...
No operation starts when operation buttons
are pressed ...
Recording cannot be done ...
Auto Focus does not operate ...
Sound from microphone can't be monitored
...
Sound can't be heard ...
100-K.57-63.p65
Before Requesting Service
Correction
• Make sure the Power Source is connected.
(pp. 10, 11)
• Make sure the POWER switch is set to VCR or
CAMERA. (pp. 28, 33)
• Check the Dew Indicator. (p. 27)
• Make sure the battery is fully charged. (p. 9)
• Make sure all necessary cables are connected
correctly and firmly. (p. 11)
• Make sure the Lens Cap is removed. (p. 28)
• Make sure the Power Source is connected.
(pp. 10, 11)
• Insert the cassette with the window side facing up.
(p. 7)
• Make sure the Power Source is connected.
(pp. 10, 11)
• Check the Dew Indicator. (p. 27)
• Make sure the record tab is closed. (p. 13)
• Check the Battery Indicator. (p. 25)
• Make sure the FOCUS is set to AUTO. (p. 45)
• Make sure the unit is ON with CAMERA mode.
(p. 28)
• Make sure the unit is set to REC or Record/Pause
mode.
• Make sure the Audio on the VCR MENU is set to
ST1. (pp. 22, 49)
61 00/06/14, 11:58
61