Software Installation (Windows 95/98)
54
100-K.53-56.p65
Before you begin...
• Your PC is in the power on mode.
1
Turn your PC (Personal computer) on
and start up Windows.
2
Insert PHOTOVU LINK DRIVER Disk
(Windows 95/98) into a floppy disk
drive.
3
Click on Start, then "Run... ... ... ... ... "
4
Type in "a:\setup.exe" and click OK.
• If your 3.5 inch floppy disk drive is not
5
Follow the instructions as they appear
on the PC screen until the installation
is complete.
• Setup window will disappear when
54
"A", use the appropriate letter.
the installation is complete.
00/06/14, 11:58