Table of Contents
Advertisement
Colour Enhancement Light (Optional)
Using the Light
To brighten the natural colours in a scene.
Built-in Light Mount
LIGHT RELEASE
Button
Note
• Using the light will reduce battery operating time.
• If using the Enhancement Light for an extended period of time, be sure to provide
ventilation when using it in a hot environment.
• Be sure LIGHT is set to OFF when not in use.
• Do not attempt to lift or carry the Palmcorder by holding the Enhancement Light.
• If light bulb needs to be replaced, take Light to your nearest authorized servicentre.
14
100-K.10-17.p65
Before you begin...
• Connect the Palmcorder to a power source
• Set POWER to CAMERA.
1
2
3
LIGHT Button
To remove the Light:
Press LIGHT RELEASE and slide the Light
out of the mount.
Caution:
This light becomes hot during operation.
Make sure nothing covers the Light during
operation.
14
(pages 10, 11).
Slide Light into the Built-in Light
Mount.
Be sure it locks into place.
Press LIGHT ON.
Press LIGHT again to turn OFF.
00/06/14, 11:54
Advertisement
Table of Contents
