Clarke Encore S28 Operator's Manual page 25

MAINTENANCE
Adjusting Squeegee Blades
When properly installed the front blade should be ap-
proximately .06 above the rear blade. See figure #31.
Adjusting Squeegee Support Wheels:
The support wheels should be set at .12 above the floor
with the rear blade touching the floor. See figure #31.
WARNING: Maintenance and repairs must be
done by authorized personnel
only .
WARNING: Electrical repairs must be done
by authorized personnel only.
Consult your Clarke Authorized Service Person to do the
service procedures.
Use only genuine Clarke parts.
How to Clean the Solution Line
If the solution line becomes clogged, pull the filter
assembly out from behind the brush housing (Figure #32
and remove the filter screen (Figure # 33) and clean or
replace it. Push filter assembly back inside frame.
Clarke ®
Operator's Manual - Encore S28/L28/S33/L33/S38/L38
.12
Figure #31
Figure #32
Figure #33
- 25 -