Clarke Encore S28 Operator's Manual page 19

HOW TO OPERATE THE MACHINE (cont.)
NOTE: Put the machine in the slow traverse speed.
Use the machine in an area that has no furniture and
objects until you can do the following:
1. Move the machine in a straight direction, forward and
backward.
2. Stop the machine safely.
3. Move the machine in a straight direction after you turn
the machine.
To move the machine, follow this procedure:
1. Turn the key switch "ON" position.
2. Put the brush switch in the "UP" position.
3. Raise the squeegee.
4. To go forward, push the control handles toward the
machine. See figure #19.
5. To stop the machine, put the handles in the center
position.
6. To go backward, pull the handles away from the
machine. See figure #20.
7. To turn the machine, push the rear of the machine to
the side.
8. When you stop the machine, turn the key switch
"OFF".
Clarke ®
Operator's Manual - Encore S28/L28/S33/L33/S38/L38
Figure # 19
Figure #20
- 19 -