Using The Status Bar And The Menu Bar - JVC SP-EXA10 Instructions Manual

Using the status bar and
the menu bar
7 When a disc is played back
1
Slide the remote control
mode selector to DVD.
2
Press ON SCREEN twice.
• "ON SCREEN" will appear in the display
window on the DVD player. The status bar
and the menu bar will appear on the TV
screen.
Example:
When a DVD VIDEO is loaded
Status bar
Menu bar
3
Press 2/3 (cursor) to select an
item to be operated.
4
Press ENTER.
• The selected function can be set. For the
setting content, refer to "Function list".
(A page 37)
• The currently active function is shown in
blue.
• To turn off the menu bar, press ON
SCREEN.
For the locations of the remote
control buttons, refer to page 28.
Information displayed on the status bar
DVD VIDEO/DVD AUDIO/DVD VR (the example
below is for a DVD VIDEO)
Sound
signal type
(DVD VIDEO/DVD VR)
(DVD VIDEO)
Current title number
(DVD AUDIO)
(DVD AUDIO)
Current group number
(DVD VR)
Current original
program number (PG)/
current play list
number (PL)
VCD/SVCD/CD/ASF/DivX/MPEG1/MPEG2 disc
(the example below is for a CD)
Playback mode status
(VCD/SVCD/CD)
Current track number
(ASF/DivX/MPEG1/MPEG2 disc)
Repeat mode status
NOTE
• The playback status has the same meaning of the
mark on the on-screen guide (
Time Playback
status
Current chapter number
Current track number
0:25:58
Time Playback
status
A
page 25).
36