Pausing Playback; Advancing The Picture Frame By Frame; Fast Reverse/Fast Forward Search - JVC SP-EXA10 Instructions Manual

Pausing playback

7 When a disc is played back
1
Slide the remote control
mode selector to DVD.
2
Press 8.
• To return to normal playback, press 3
(play).
Advancing the picture
frame by frame
(only for moving image)
7 When a disc is paused
1
Slide the remote control
mode selector to DVD.
2
Press 8 repeatedly.
The following messages appear depending on the status of the DVD player.
NOW READING
REGION CODE
ERROR!
NO DISC
OPEN
CLOSE
CANNOT PLAY THIS
DISC
Messages displayed on the TV when the power is turned on
Appears when the DVD player is reading the disc information. Wait for a while.
Appears when the Region Code of the DVD does not match the code the DVD
player supports. (A page 47)
Appears when no disc is loaded.
Appears when the disc tray is opening.
Appears when the disc tray is closing.
Appears when an unplayable disc is attempted to be played back.
For the locations of the remote
control buttons, refer to page 20.
Fast reverse/fast forward
search
7 When a disc is played back
1
Slide the remote control
mode selector to DVD.
There are two methods in step 2.
2
Press 1 or ¡.
• Each time you press the button, the speed
increases. To restore the normal speed,
press 3 (play).
Hold down PREVIOUS 4 or
NEXT¢.
• Fast reverse/fast forward search can be used
only while the button is pressed.
NOTE
• For some discs, sound is intermittent or no sound will
be produced during fast reverse/fast forward search.
• The selectable speeds and displays vary by the disc
type.
24