Cancelling Advanced Scm; Selecting The Level Display - JVC KS-FX90 Instructions Manual

1 2
Select.
CLOCK H Hour adjustment
CLOCK M Minute adjustment
SCM LINK Sound control memory
linkage
LEVEL Level display
DIMMER Dimmer
TEL Auto mute for cellular
phone system
B. SKIP Blank skip
*
LINE IN External component
* Displayed only when one of the following sources is selected — FM, AM and tape.
• Press SEL (select) when the setting is complete.
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON: Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "SCM LINK" with ¢
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:

Selecting the level display

You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Altenates "AUDIO 1" setting and illumination display.
• OFF: Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "LEVEL" with ¢
3. Select the desired mode with the control dial.
The level display setting changes as follows:
3
Back
Back
LINK OFF
AUDIO 1
AUTO
OFF
OFF
CHANGER
or 4
.
or 4
.
AUDIO 1 AUDIO 2
Set.
Advance
Advance
LINK ON
AUDIO 2
OFF
OFF
ON
MUTING 1
MUTING 2
ON
LINE IN
LINK ON
OFF
Factory-preset
See
settings
page
0:00 19
LINK ON below
AUDIO 2 below
AUTO 22
OFF 23
OFF 13
CHANGER 22
LINK OFF
21