Playing CDs ................................................................................... 27
MAINTENANCE ........................................................ 31
SPECIFICATIONS ....................................................... 33
How to reset your unit
After detaching the control panel, press reset
button on the panel holder using a ball-point
pen or similar tool.
This will reset the built-in microcomputer.
NOTE:
Your preset adjustments - such as preset channels
or sound adjustments will also be erased.
BEFORE USE
* For safety....
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
• Stop the car before performing any complicated
operations.
* Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
3