Schedule; Add New Plan - Pantech TX-130C User Manual

TX_130C_TNZ_050601 2005.6.1
VOICE SVC
VOICE SVC
WAKE-UP
Use to train or untrain the Voice Recognition with the
control word, "Wake-Up".
1. Press [MENU]
2. "Please hold phone to ear and follow instructions" will
be displayed and you will hear "Now training control
words. Please say the word wake-up".
3. Say "Wake-up". You will hear "Again".
Say "Wake-up" again. You will hear "Training word
successful".
UNDO TRAIN ALL
Undo Train All erases all "trained" words.
1. Press [MENU]
2. "Undo voice recognition for all procedures?" will be
displayed. Press
Page 88 - Chapter 5
2:7 PM Page 90
.
.
[YES] to undo all trained words.

SCHEDULE

SCHEDULE
Sets a schedule and reminds you of that event.

ADD NEW PLAN

1. Press [MENU]
2. Move the Navigation Key left, right, up or down to
choose a date in the calendar then press
3. To select alarm options press the Navigation Key
downwards.
DATE SETTING
Use the keypad to change or enter the date then
press [OK].
TIME SETTING
Use the keypad to set a time for the event and the
select "AM" or "PM" then press
PLAN SETTING
Use the keypad to input a plan message then
press .
SETTING
Select an alert time interval option (On Time, 10 Min
Before, 30 Min Before, 1 Hour Before, No Alarm) using
the Navigation Key.
RINGER SETTING
To set a Ringer, press [OPTIONS], then select
"Default" or "Change" using the Navigation Key.
To save it, press .
● Default: To set default ringer type.
● Change: To set custom ringer type.
.
.
to
[OK].
Chapter 5 - Page 89