Pantech TX-130C User Manual page 37

TX_130C_TNZ_050601 2005.6.1
SETTINGS
SETTINGS
CHANGE LOCK
Changes your 4-digit password.
1. Press [MENU]
NOTE: The default password is either the last 4 digits of
your phone number or 0000.
2. Press .
3. Enter a new password then press
4. Enter the new password again then press
SPECIAL #'S
Stores 3 phone numbers that can be called even in the
lock mode.
1. Press [MENU]
NOTE: The default password is either the last 4 digits of
your phone number or 0000.
2. Press then select a location with the Navigation
Key.
3. Press [SET] and input a phone number,
press again to save.
NOTE: You can delete a special number by selecting it,
pressing [ERASE], then
Page 70 - Chapter 4
2:6 PM Page 72
then enter "Password".
.
.
then enter "Password".
[YES] or .
SETTINGS
SETTINGS
LIMIT USE
OUTGOING CALLS
Blocks all outgoing calls – except emergency calls and
special #'s – but allows an incoming call to be placed.
1. Press [MENU]
2. Press then select "Allow" or "Restrict".
● Allow : Allows a dialed call.
● Restrict : Restricts a dialed call.
3. To save, press [OK].
CALL HISTORY
Blocks access to call history.
1. Press [MENU]
2. Press then select "Allow" or "Restrict".
● Allow: Allow access to call history.
● Restrict: Restrict access to call history.
3. To save, press [OK].
PHONE BOOK
Blocks access to, and protects data in your phone book.
1. Press [MENU]
2. Press then select "Allow" or "Restrict".
● Allow: Allows access to the phone book.
● Restrict: Restricts access to the phone book.
3. To save, press [OK].
then enter "Password".
then enter "Password".
then enter "Password".
Chapter 4 - Page 71