System Network; Networking - Thecus N8900 series User Manual

System Network

Use the System Network menu to make network configuration settings for on
board network ports or additional NIC as well as DHCP and link aggregation.

Networking

From the System Network menu, choose Networking, and the Networking
Configuration screen appears. This screen displays the network parameters of
the global setting and available network connection. You may change any of these
items and press Apply to confirm your settings. See a description of each item in
the following table:
The available system network ports are coming from embedded of system and
additionally added from reserved PCI-e slot with associated compatible list.
Therefore, the screen shows above is example from Thecus N16000 with 3 GbE NIC
on board and installed additional Intel PRO/1000 PT quad port NIC, it makes total
7 NIC ports for the system.
Network Configuration (Global parameter)
Item
Host name
Domain name
WINS Server
DNS Mode
DNS Server 1,2,3
Description
Host name that identifies the Thecus IP storage on the network.
Specifies the domain name of Thecus IP storage.
To set a server name for NetBIOS computer.
Select the DNS server is coming from DHCP server or manual input.
It has totally 3 DNS servers can be input. If choose DNS server is
granted from DHCP server then it will refer to WAN/LAN1 port.
Domain Name Service (DNS) server IP address.
56