Thecus N8900 series User Manual page 81

With this newly attached stack target device, you will see the information displayed
and also several options you can choose.
In general, if attached stack target device has been used by another Thecus NAS as
stack target volume, then the Format item will be display and system will
recognize it straight away and display its capacity. Otherwise, the Format item will
be available and the Capacity and Status items will show as "N/A" and "Unknown
file system" respectively.
Next, click Format to proceed with formatting.
After the format is complete, the stack target volume will be created successfully.
You will see the volume's capacity and status in the Stack Target List screen.
C. Edit a Stack Target
To make any changes to stack targets, click Edit for the corresponding stack target,
and system will bring up the following dialogue:
81