Thecus N8900 series User Manual page 69

NOTE
WARNING
RAID Level
You can set the storage volume as JBOD, RAID 0, RAID 1, RAID 5, RAID 6,
RAID 10, RAID 50 or RAID 60 (depend on model).
Level
JBOD
Model

N12000 series

N16000 series

N8900 series

N6850

N8850

N10850

N7700PRO V2

N8800PRO V2

N5550
RAID configuration is usually required only when you first set up the device. A brief
description of each RAID setting follows:
RAID Levels
Level
JBOD
RAID 0
RAID 1
Building a RAID volume may take time, depending on the size of hard drives
and RAID mode. In general, while the RAID volume building process is up to
"RAID Building" then the data volume is capable to be accessed.
Creating RAID destroys all data in the current RAID volume. The data is
unrecoverable.
RAID 0 RAID 1 RAID 5
 
 
 
 
 
 
 
 
 
Description
The storage volume is a single HDD with no RAID support. JBOD
requires a minimum of 1 disk.
Provides data striping but no redundancy. Improves performance
but not data safety. RAID 0 requires a minimum of 2 disks.
Offers disk mirroring. Provides twice the read rate of single disks,
69
RAID 6 RAID 10
  
  
  
  
  
  
  
  
  
RAID 50 RAID 60
 
 
 

 
 

 