System Monitor - Thecus N8900 series User Manual

Configuration with syslog client and target to store remotely:
See the following table for a detailed description of each item:
Time
Item
Syslog Daemon
Syslog service
Target
Syslog folder
Log Level
Remote IP Address

System Monitor

The system monitor is capable to monitor system status included CPU/memory
utilization, fan/temperature status, network throughput and on-line users list in
varies protocols.
To monitor system status, simply click on "System Monitor" from menu tree and
screen appear as below.
Description
Enable/Disable syslog daemon.
If Server has been selected then associated syslog folder will be
used to store all system logs from other NAS devices which has
assigned this system for syslog server as well as syslog of this
server unit. It can be seen from associated syslog folder with files
"error", "Information" and "warning".
If client has been selected then "Local" or "Remotely" can be
choose.
Choose Local then the all system log will be stored in associated
syslog folder filled in from next filed. And the syslog folder will
have file "messages" to store all system logs. If Remotely has
selected then syslog server is needed and IP address is required.
Select from drop down share list then all of system logs will stored
on it. This syslog folder is applied to "syslog server" or "syslog
client with local selected".
It has 'All", "warning/error" and 'Error" 3 different level can be
choose from.
Input syslog server IP address while choose store syslog info
remotely.
45