Lint Filter - Haier HLT364XXQ Service Manual

Lint Filter

The lint filter must be used during washing.
It must be cleaned in time after each using.
1 Take off the lint filter.
2
Clean up the lint in the filter.
3
Install the lint filter.
Install the inner cover
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover, aiming the inner
cover shaft to the installation hole of the corresponding outer tub cover
shaft groove.
3.Firstly insert the inner cover shaft of one side into the corresponding outer
tub cover shaft groove, then push the another inner cover shaft into the
corresponding outer tub cover shaft groove. Please install to designated
position to guarantee there are no dropping or abnormal sound in opening
and closing of the inner cover, and the operation shall be smooth. Do not
dismount the inner cover component after washing.
Outer tub cover
Outer tub cover
shaft groove
Inner cover shaft
Inner cover
OPERATING INSTRUCTIONS
Section I enlarging
Push