Manually Setting The Shutter Speed Or Aperture - Canon Legria HFM31 Instruction Manual

To fade in/out
Press g in record pause mode (M) to start recording with
a fade in. Press g while recording (
the recording.
Options
( Default value)
N
[ Off]
ital effects.
[2 Black & White]
white.
[3 Sepia]
"old" look.
0
[ Fade Trigger/Once], [
7
[ Wipe/Always]
scene with a fade from or to a black screen. You can choose to
activate the fader only once, or every time you press
g to begin or end a scene.
* Only these digital effects are available in
NOTES
• When you apply a fader, not only the picture but also the sound will fade
in or out. When you apply an effect, the sound will be recorded normally.
• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.

Manually Setting the Shutter Speed or Aperture

[A Programmed AE] is the default automatic exposure (AE) recording
program; using it, you can change functions like the white balance or
image effects. Select one of the other AE recording programs to control
the shutter speed or aperture.
Operating modes:
Select this setting when you do not intend to use the dig-
* Records movies and photos in black and
* Records movies and photos in sepia tones for an
6
Select one of the faders to begin or end a
N
Fade Trigger/Always], [
mode.
) to fade out and pause
1
Wipe/Once],
Video
67