General Settings - Psm; Basic Procedure - JVC Model KW-XC400J Instruction Manual

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items (except "SID") listed in the table that
follows.
1
2
Select a PSM item.
Indications
DEMO MODE
Display
demonstration
CLOCK HOUR
Hour adjustment
CLOCK MIN
Minute adjustment
CLOCK DISP
Clock display
LEVELMETER
Audio level meter
20
Selectable settings, [reference page]
DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF : Cancels.
1 – 12, [8]
[Initial: 1 (1:00)]
00 – 59, [8]
[Initial: 00 (1:00)]
CLOCK ON : Clock time is shown on the display at all times even
when the unit is turned off.
CLOCK OFF : [Initial]; Clock time is shown when the unit is turned
on. If the unit is turned off, pressing DISP will show
the clock time for about 5 seconds.
You can select one of the four different level meter patterns or a
demonstration of all the patterns.
LEVEL ALL [Initial] O LEVEL 1 O LEVEL 2 O LEVEL 3 O
LEVEL 4 O LEVEL OFF (canceled) O (back to the beginning)
LEVEL ALL : Demonstrates all the level meter patterns, each for
about 20 seconds.
3
Adjust the PSM item selected.
4
2
Repeat steps and
other PSM items if necessary.
5
Finish the procedure.
3
to adjust the