Satellite Radio Operations - JVC Model KW-XC400J Instruction Manual

Satellite radio operations

This unit is Satellite (SAT) Radio Ready–
compatible with both SIRIUS Satellite radio
and XM Satellite radio.
Before operating your satellite radio:
• For connection, see Installation/
Connection Manual (separate volume).
• Refer also to the Instructions supplied
with your SIRIUS Satellite radio or XM
Satellite radio.
• "SIRIUS" and the SIRIUS dog logo are
registered trademarks of SIRIUS Satellite
Radio Inc.
• XM and its corresponding logos are
registered trademarks of XM Satellite
Radio Inc.
• "SAT Radio," the SAT Radio logo and all
related marks are trademarks of SIRIUS
Satellite Radio Inc., and XM Satellite
Radio, Inc.
Listening to the satellite radio
Connect either one of the following (separately
purchased) to the CD changer jack on the rear
of this unit.
• JVC SIRIUS radio DLP—Down Link
Processor, for listening to the SIRIUS
Satellite radio.
• XMDirect™ Universal Tuner Box
using a JVC Smart Digital Adapter—
XMDJVC100 (not supplied), for listening to
the XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription,
updating starts automatically.
"UPDATING" flashes and no sound can be
heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your
satellite radio.
24
Activate your SIRIUS subscription after
connection:
1
2
JVC DLP starts updating all the SIRIUS
channels.
Once completed, JVC DLP tunes in to the
preset channel, CH184.
3
Check your SIRIUS ID, see page 21.
4
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you
can call SIRIUS toll-free at
1-888-539-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls
on the display once subscription has been
completed.
Activate your XM subscription after
connection:
• Only Channel 0, 1, and 247 are available
before activation.
1