Advertisement
Changing the temperature scale
This thermometer is shipped with the Celsius temperature scale
activated. If you wish to switch to Fahrenheit (F), proceed as follows:
• Switch on the thermometer.
(If it is already switched on, make sure it is not in memory mode.)
• Press the
/ mem button and keep it pressed. Then press and
release the activation button to switch over to the «change
temperature scale» mode.
• By pressing the activation button again, the Fahrenheit scale is
activated, «°F» is displayed on the LCD. Each further pressing of the
activation button toggles the scale between °C and °F.
• Release the
All temperatures stored in memory will automatically be converted to
the selected scale when displayed on the LCD.
Care and cleaning
The probe tip is the most delicate part of the thermometer.
It has to be clean and intact to ensure accurate readings.
If the thermometer is ever accidentally used without a lens filter,
clean the probe tip as follows:
• Hold the appliance with the probe tip facing down to prevent liquid
from entering the probe tip area. Very gently wipe the surface with a
cotton swab of soft cloth moistened with alcohol.
• After cleaning, allow at least 45 minutes drying time before
reattaching a new, clean lens filter and taking a temperature.
If the probe tip is damaged, contact Braun.
Use a soft, dry cloth to clean the thermometer display and exterior.
Do not use abrasive cleaners. Never submerge this thermometer in
water or any other liquid.
Store thermometer and lens filters in a dry location free from dust and
contamination and away from direct sunlight. The ambient temperature
at the storage location should remain fairly constant and within the
range of 10 °C to 40 °C or 50 °F to 104 °F.
Additional lens filters (LF 40) are available at most stores carrying
Braun ThermoScan or at Braun Service Centers.
8
/ mem button to return to the ready symbol
.
9
Advertisement
