Page 2
(below –4 °F / –20 °C or over 122 °F / 50 °C) nor excessive humidity (> 95 % RH). • This thermometer must only be used with genuine Braun ThermoScan Lens Filters. Other lens filters can lead to inaccuracy. • To avoid inaccurate measurements always use this thermometer with a new, clean lens filter attached.
Page 3
3 Probe 4 «start» button 5 Lens filter detector 6 Display 7 Battery door How to use your Braun ThermoScan 1. To achieve accurate measurements, make sure a new, clean lens filter (2) is in place before each measure- ment.
Page 4
«start» button once. Fit the probe snugly into the ear canal, then push the «start» button. The Braun ThermoScan ear thermometer turns off automatically after 60 seconds of inactivity. Temperature taking hints • The right ear measurement may differ from the measurement taken in the left ear.
Page 5
Call Kaz Customer questions? Service. Changing the temperature scale Your Braun ThermoScan is shipped with the Fahrenheit (°F) temperature scale activated. If you wish to switch to Celsius (°C), proceed as follows: Make sure the thermometer is turned off. Press and hold down the «start» button. After about 8 seconds the display will show this sequence: «°F»...
Page 6
To protect the environment, dispose of empty batteries at appropriate collec- tion sites according to national or local regulations. Calibration The thermometer is initially calibrated at the time of manufacture. If this thermometer is used according to the use instructions, periodic re- adjustment is not required.
Need help?
Do you have a question about the ThermoScan IRT 3020 CO and is the answer not in the manual?
Questions and answers