Subscribe to Our Youtube Channel
Related Manuals for Braun IRT 3020
Summary of Contents for Braun IRT 3020
- Page 1 Braun h elpline Should you require any further assistance please call Braun (UK) Customer Relations on 0 19 32 / 79 22 33. IRT 3020 IRT 3520 Internet: www.braun.com Type 6012 Type 6013...
- Page 2 – 20 °C/4 °F or over 50 °C/122 °F) nor excessive humidity (> 95 % RH). • This thermometer must only be used with genuine Braun ThermoScan Lens Filters (LF 40). Never use this thermometer without a new, clean lens filter attached.
-
Page 3: Body Temperature
This is showing all segments. easily done using Braun ThermoScan. Practise taking temperatures on yourself and healthy family members to determine their normal temperature ranges. 3. An «ear tug» straightens the ear canal to give a clear view of the eardrum. -
Page 4: Memory Mode
5. Remove the thermometer from the ear canal. The LCD displays the temperature measured. IRT 3020 The stored temperature is displayed along with the 6. Repleace the lens filter after each measurement: MEM symbol. To quit the memory mode, press the press the ejector button and put on a new, clean / mem button again. -
Page 5: Changing The Temperature Scale
• After cleaning, allow at least 45 minutes drying time before reattaching a new, clean lens filter and taking a temperature. If the probe tip is damaged, contact Braun. Use a soft, dry cloth to clean the thermometer display and exterior. -
Page 6: Troubleshooting
93.2 - 108 °F.) Then, take a new temperature. periodic re-calibration is not required. If at any time you question the accuracy of measurement, please contact Braun. To determine the date of manufacture, refer to the LOT number located HI = too high in the battery compartment. - Page 7 Gold Seal Service Centre. In the unlikely event that you experience a problem with this product, Braun (UK) Ltd. promise to resolve the problem within 5 days (excluding weekends) of receipt by an approved Gold Seal Service Centre.
Need help?
Do you have a question about the IRT 3020 and is the answer not in the manual?
Questions and answers
Ho sotituito le batterie ma non si accende
If the Braun IRT 3020 does not turn on after replacing the batteries, possible reasons include:
1. Incorrect Battery Installation – Ensure the batteries are inserted with the correct polarity.
2. Battery Door Not Secure – Make sure the battery compartment is fully closed and locked in place.
3. Faulty or Expired Batteries – Try using new, working CR2032 lithium batteries.
4. Internal System Error – Remove the batteries, wait a few minutes, and reinsert them.
5. Device Malfunction – If the issue persists, the thermometer may need servicing at a Braun Customer Service Center.
This answer is automatically generated