Ocean Aire CAC1211 Installation And Service Manual page 14

ACCESSORIES
CONDENSER
DISCHARGE
CONDENSER
RETURN
CONDENSER
RETURN PANEL
CCP-8
CONDENSATE PUMP KIT
CPC-1
CONDENSER
DISCHARGE
BAFFLE
CONDENSER
DISCHARGE
RING
8-INCH DISCHARGE
ADAPTER
CDA-8
NOZZLE KIT
EVAPORATOR
RETURN PANEL
CEP-6
12
ACCESSORIES
CONDENSATE PUMP KIT , CPC-1
The condensate pump provides for the automatic
removal of condensate water during the cooling proc-
ess. The pump is capable of pumping against a 20 foot
head, allowing for the routing of the drain line above
the drop-ceiling to a nearby drain. The pump is
controlled by an internal float-switch which turns the
pump on and off automatically. The pump is also
equipped with a condensate over-flow safety switch,
that will shut down the compressor when the pump is
not working properly. The word "CON" will be displayed along with the room temperature.
Kit includes the pump, mounting hardware and 24 feet of condensate hose.
CEILING PANEL DUCT KIT, CK-8
A ceiling panel kit is available for discharging the condenser air above a drop ceiling..
The ceiling panel duct kits are furnished with an 8-inch white vinyl coated flexible duct that
allows for convenient installation. A 2ft X 2ft ceiling duct-panel is included to replace a 2ft
X 2ft drop-ceiling panel where the connection is desired. The CK-8 ceiling panel kit con-
sists of a 2' X 2' lay in ceiling panel with duct flange, 8-Inch vinyl coated flex-duct and the
CDA-8 discharge adapter that attaches to the condenser air discharge opening on the
back of the unit.
Note—Drop ceiling spaces should be vented or
large enough to handle the warm condenser air.
Check local codes to assure compliance.
CNK-1
CONDENSATE PUMP KIT
CPC-1
CONDENSER
DISCHARGE
CEILING
PANEL
8-INCH
FLEX-DUCT
DISCHARGE
ADAPTER
CDA-8
CK-8, CEILING
DISCHARGE KIT
13