Clifford 50.7X Installation Manual page 36

Step
2
Delete remotes: This feature erases all remotes from the memory of the security
system. This is useful in cases when a customer's remote is lost or stolen.
Note: This does not reset the programmed features of the security system or
reset the Virtual Tach setting.
3
Reset Features: This resets features all of the security system to the factory
default settings.
Note: This feature does not delete the remotes from the security system or reset
the Virtual Tach setting.
4
Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on
the next remote start sequence the unit begins virtual tach initialization.
Note: The "Zap" feature on the Bitwriter does not reset the Virtual tach
setting.
Learn Routine is exited if:
• The door is closed
• The ignition is turned off
• The program switch is pressed too many times
• More than 30 seconds elapses between steps
1. Texture is same as
2. Radious will be if not specified.
3. Body color :
C
±
0.30
0.40
0.80
2.00
94I0600
36
4. Transmit. While holding the Valet/Program switch,
press the button on the remote control. The unit chirps
to confirm that the code has been successfully pro-
AUX
grammed. It is not possible to teach a remote control
button to the system more than once.
REV.
5. Release. Once the code is learned, the Valet/Program
1
switch can be released. You can advance from one
function step to another by releasing the Valet/Program
switch and tapping it to advance function steps and then
holding it.
10.44
11.50
SCALE: UNIT:
DRN BY
M/M VICTOR
1:1
MATERIAL CHK BY
FELIX
FINISH APPD BY
YGF
CODE SHEET
Function
REVISIONS
DESCRIPTION DRN. DATE
CASE P/N:IADGH0A1
KEY P/N:IKDEL0A0
DATE
NUTEK
CORPORATION
11/20/07
DEI
TITLE
OLED IVU
SIZE DEPT DRAWING NO
94I0600
A4
OF
© 2008 Directed Electronics. All rights reserved.
REV
0