Changing The Display Pattern - JVC LVT1055-001A Instruction Manual

Selecting a preset station using the
preset station list
If you forget which stations are stored in which
preset numbers, you can check the preset
station list, then select your desired station.
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
repeatedly to select the tuner.
SRC
2 Press and hold SRC.
Each time you press and hold
the button, the band changes.
FM1 FM2
2
Press and hold 5 (up) or ∞ (down)
until the preset station list for the
current band (FM1, FM2, FM3, or AM)
appears on the display.
Notes:
• You can show the other FM band preset
station lists (FM1, FM2, or FM3) by pressing
5 (up) or ∞ (down).
• If a name has been assigned to a station (see
page 57), it will be shown instead of the
station frequency.
3
Select the number (1 – 6) for the
preset station you want.
1 2 3
FM3 AM
4 5 6

Changing the display pattern

By pressing DISP (D), you can change the
information shown on the display.
Each time you press the button,
DISP
the display patterns change as
D
follows:
Appears only when
selecting a preset station
number.
If a name has been assigned
to a station, it will be shown
instead of "NO NAME."
Clock time
15