Storing your own sound
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory (USER sound mode).
• There is a time limit in doing the following
procedure. If the setting is cancelled before you
finish, start from step 1 again.
1
Select "EQ."
Canceled
2
Select sound elements to adjust.
Each time you press the
button, the sound elements to
adjust change as follows:
LOW FREQ.*
MID FREQ.*
HIGH FREQ.*
(back to the beginning)
FREQ. (LOW, MID, HIGH):
Select the center frequency to
adjust.
LEVEL (LOW, MID, HIGH):
Adjust the enhancement level
* By pressing ¢
directly move as follows:
LOW FREQ.
HIGH FREQ.
EQ
S.BASS
L.V.METER
LOW LEVEL
MID LEVEL
HIGH LEVEL
.
or 4
, you can
MID FREQ.
3
Adjust the selected sound element.
Indication
LOW FREQ.
50 Hz, 80 Hz, 120 Hz
LOW LEVEL
–06 (min.) — +06 (max.)
MID FREQ.
700 Hz, 1 kHz, 2 kHz
MID LEVEL
–06 (min.) — +06 (max.)
HIGH FREQ.
8 kHz, 12 kHz
HIGH LEVEL
–06 (min.) — +06 (max.)
EQ level adjusted flashes
Ex.: When you adjust "LOW FREQ"
4
Repeat steps 2 and 3 to adjust the
other sound elements.
5
Store the adjustments.
Your setting is stored in USER
sound mode.
• Refer to the table
below for adjusting the
selected sound
element.
Range
27