Selecting Preset Sound Modes - JVC LVT1099-001A Instruction Manual

Jvc cd/cassette receiver instruction manual
Table of Contents

Advertisement

Selecting preset sound modes

You can select a preset sound adjustment
suitable to the music genre.
1
Select "EQ."
2
Select the sound mode.
FLAT
Hard Rock
POP
JAZZ
Country
USER**
* Rhythm and Blues
** If you want to adjust and store your original
sound mode (USER), see "Storing your own
sound adjustments" on page 27.
EQ level changes as you
select the sound mode.
Ex.: When you select "R & B"
To cancel the sound mode, select "FLAT" in
step 2 .
Note:
You can adjust the sound mode to your preference,
and store it in memory.
26
EQ
S.BASS
Canceled
L.V.METER
The sound mode
changes as follows:
R & B*
DanceMusic
Raggae
Classic
(back to the beginning)
To store a sound mode separately for each
playback source (EQ Link)
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source. A sound mode can be stored
for each of the following sources—FM1, FM2,
FM3, AM, CD, tape, external components and
the EX (extra) button (see page 10).
• See also "Changing general settings (PSM)" on
page 30.
1
Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
Press ¢
or 4
2
(Equalization Link)."
3
Press + to select "LINK ON."
4
Press SEL (select) to finish the setting.
To cancel EQ Link, repeat the same procedure
and select "LINK OFF" by pressing – in step 3 .
• When "EQ LINK" is set to "LINK ON"
The selected sound mode and Super Bass
level can be stored in memory for the current
source.
Each time you select the same source, the
same sound mode is also recalled, and shown
after the source name.
• When "EQ LINK" is set to "LINK OFF"
The selected sound mode effect applies to all
the sources selected.
to select "EQ LINK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-xc939eeKw-xc939

Table of Contents