Low Priority Qos Queue Configuration; High Priority Qos Classification - NetComm NF8AC User Manual

Low Priority QoS Queue Configuration

21. Select Advanced > Quality of Service > Queue Config.
22. Click the Add button.
23. Enter a name of 15 characters or less to reflect the device that will have low priority QoS e.g. PC2LowPriority.
24. Set the Enable option to Enable.
25. Set the Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0)0)100)).
26. Enter a Precedence. For the lowest priority, set it to 3. For the highest priority use 1.
27. Set the DSL Latency as Path0.
28. Click the Save/Apply button.

High Priority QoS Classification

29. Select Advanced > Quality of Service > QoS Classification.
NetComm Wireless NF8AC User Guide
61
www.netcommwireless.com