Upnp; Dns Proxy - NetComm NF8AC User Manual

The DSL advanced settings relate to test mode settings. The default selection is 'Normal'.
ADSL Tone Settings
For ADSL Tone Settings select the 'Tone Selection' button on the DSL Advanced Settings page.
The frequency band of ADSL is split up into 256 separate tones, each spaced 4.3125kHz apart. With each tone carrying separate
data, the technique operates as if 256 separate routers were running in parallel. The tone range is from 0 to 31 for upstream traffic
and from 32 to 255 for downstream traffic. Do not change these settings unless you are directed by your Internet Service Provider.

UPnP

Universal Plug and Play (UPnP) is a set of networking protocols that can allow networked devices, such as computers, printers, WiFi
access points and mobile phones to automatically detect each other's presence on the network and establish functional network
services for data sharing, communications, and entertainment.

DNS Proxy

To enable DNS Proxy settings, select the corresponding checkbox and then enter the Host and Domain name, as in the example
shown below. Click Apply/Save to continue.
The Host Name and Domain name are combined to form a unique label that is mapped to the router IP address. This can be used
to access the user interface of the router with a local name rather than by using the router IP address.
NetComm Wireless NF8AC User Guide
39
Figure 21: Advanced - DSL - ADSL Tone Settings
Figure 22: Advanced – UPnP
Figure 23: Advanced - DNS Proxy
www.netcommwireless.com