Product Features - Black & Decker BDH1800PL Instruction Manual

1. On/off switch
2. Pivot lock button
3. Charging indicator
4. Dust collector
5. Bowl release button
6. Crevice tool
7. Brush tool
8. Dust bowl door
9. Dust bowl door release
10. Removable dust bowl
11. Charging base
ASSEMBLY
ADjUSTING THE DUST
COLLECTOR (FIG. A - C)
The dust collector (4) has a brush (7) that can
be folded forward for dusting and upholstery
cleaning.
• The dust collector (4) is stored under the
appliance.
• Press the pivot lock button (2) and rotate
the dust collector (4) to the required position.
• Release the pivot lock button (2) to lock
the dust collector in position
• The dust collector can be extended by
pulling the crevice tool (6) until it locks into
position.
• The crevice tool can be retracted by
pressing the raised button on the crevice
tool and pushing the crevice tool back into
the dust collector.
• The dust collector should be returned to
the storage position under the appliance
after use and while charging the appliance.
USE
• Before first use, the battery must be
charged for at least 24 hours.
• Plug the appliance into the charger
whenever power gets low.
CHARGING THE BATTERY (FIG. D)
WARNING:
ambient temperatures between 50°F (10°C)
and 104°F (40°C). The charger supplied with
this product is intended to be plugged in
such that it is correctly oriented in a vertical
or floor mount position.

PRODUCT FEATURES

Charge only at
A
B
C
4
7