Reset To Factory Settings; Reset Service List - Topfield TF-T6000 User Reference

To start service search, move down to the Start Search item, and press £
¢ ¡
the OK
is common for no channels to be found until quite late in the process.
When the scan is complete, you will see a message telling you how
many services have been found. Press the

3.2 Reset to factory settings

The digital receiver maintains the following data:
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. Select the Installation >
System Recovery > Factory Setting menu, and then you get asked for
confirmation. With the choice of Yes, the services list, favourite list
and timer list will all be cleared, and preference options will be reset
to the manufacturer's factory settings.
NOTE
A factory reset will not delete any recorded programmes. However,
you have to search services again after a factory reset.

3.3 Reset service list

If you only want to clear the service list, select Installation > System
Recovery > Reset Service List , then you get asked for confirmation.
With the choice of Yes, the services list will be cleared. After this, you
have to do service search again.
button. The digital receiver will start to search for services. It
3.2 Reset to factory settings 13
£
¢ ¡
OK button to save the list.