Topfield TF-T6000 User Reference page 60

54 Troubleshooting
No power / No front display
• Make sure the main switch on the back of the Topfield unit is
• Properly insert the power plug into the power socket.
• If the power outlet is controlled by a switch, make sure the wall
• Remove the power plug from the wall and wait 10 seconds, then
• Plug another appliance into the outlet, if the other appliance
• Plug the Topfield unit power code into a different outlet.
I have connected my Topfield unit to the TV but getting no picture
• The connection must be via an AV output out of the Topfield
• Check that you are in the correct AV setting on the TV. For ex-
• Press the
When the Service Scan is finished I get zero channels
• Check that there is a signal coming from the antenna by con-
• You must have signal strength between 50%–90%
• Indoor antenna is not recommended as the signal is not enough
Getting pixilated images on the my Television
• Check the plug on the Topfield unit and on the wall making sure
• Check that there is a signal coming from the antenna by con-
• You must have signal strength between 50%–90%
switched to ON.
switch is ON.
plug back in.
doesn't work then have a qualified electrician repair the outlet.
unit to an AV input of the TV.
ample if you connected the Topfield unit to AV2 on the TV make
sure you set your TV with the TV remote to AV2 before the Top-
field unit can be used.
button on the remote and set to the correct resolu-
tion.
576i/576p/720p/1080i/1080p. You may need to press the
button multiple times to cycle through all the different formats.
All formats will be displayed on the front screen of the Topfield
unit.
necting it directly to the TV or another device.
to display channels when a service is scanned.
that it's a tight connection.
necting it directly to the TV or another device.