Printek FormsMaster 8000se Setup Manual page 5

FormsMaster
Options Setup
allows you to
set operating
variables and
install optional
products
Test Setup
allows you to
access some
testing as well
as some
record keeping
8000se Series
Configures Options
Possible Values
Functions
Max. Form Allowed: Form 0 ... Form 2* ...Form 9
Auto. Scroll Delay: Off, 0, 1* ...15 Second Delay
Paper Out Fault Action: Finish Print*, Reprint Page, Break
Page, Off
Reprint Page Size: 0, ...,8192*, ...,28672
Ribbon Checking: On* or Off
Ribbon Life: 5...23*...30 million characters
User Language: English*, French, or German
Top of Oversize: Off* or On
Top of Barcode: Off* or On
Ignore Char.: Off* or On
Char. To Ignore: 0, ..., 255*
Truncate Line: No* or Yes
Possible Values
Functions
Print the Menus: No* or Current Values
Test Mode: Off*, Barber Pole, Hex Dump,
Demos
4
OPTIONS
Description
Sets the last form to be displayed by operator selecti on with
UNLOAD/CHANGE button or while in the Forms Menu.
Sets number of seconds to delay before scrolling top of
form to tear bar when printer is idle and form boundary has
been reached.
Selects whether a paper-out condition causes Page Break
or allows you to Reprint Page.
Selects how much of the 32K byte input buffer is set as ide
for reprinting a page when Finish Page or Reprint Page
has been selected for the Paper Out Fault Action item.
Sets whether ribbon checking feature is active. Turning off
may limit the warranty on print head. For more information,
see "Using Special Features" in the User Manual and refer
to warranty in "Printer Specifications" appendix.
Set number of characters in millions to be print ed before
"Change Ribbon" message is displayed. For more
information, see "Using Special Features" in Us er Manual.
Selects the Front Panel language that will be used by the
printer's LCD screen.
(Genicom Emulation only), this feature reposit ions the print
head at the top of the oversized characters after they have
been printed. When set to OFF, printing conti nues from the
bottom of the oversized characters.
(Genicom Emulation only), this feature reposit ions the print
head at the top of a barcode after the barcode has printed.
When set to OFF, printing continues from the bottom of the
barcode.
Activates or deactivates the Character to Ignore feature.
Allows a single 8-bit character to be discarded as it is
received. (Ignore Character setting must be set to ON).
Sets whether characters beyond the right margin are
wrapped to the next line or truncated.
*Factory Default Setting
TEST
Description
Used to print a list of current values.
When set to Barber Pole, printer will print a rotating
character pattern. When set to Hex Dump, printer will print
all received data in a special debug format, used by
programmers to solve software problems. W hen set to
Demos, printer will print sample invoices and barcodes
demonstrating its printing capabilities.
*Factory Default Setting