GMC 2002 Yukon Denali Owner's Manual page 77

CAUTION:
-
If a LATCH type child restraint isn't attached
to its anchorage points, the restraint won't be
able to protect a child sitting there. In a crash,
the child could be seriously injured or killed.
Make sure that a LATCH
is properly installed using the anchorage points,
or use the vehicle's safety belts to secure the
restraint. See "Securing a Child Restraint in the
Rear Seat" in the Index for information on how
to secure a child restraint in your vehicle using
the vehicle's safety belts.
1-70
-
type child restraint
Securing a Child Restraint Designed for the
LATCH System
1. Find the anchors for the seating position you want to
use, where the bottom of the seatback meets the back
of the seat cushion.
2. Put the child restraint on the seat.
3. Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4. If the child restraint is forward
strap to the top strap anchor. See "Top Strap" in the
Index. Tighten the top strap according to the child
restraint instructions.
5. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
-
facing, attach the top