GMC 2002 Yukon Denali Owner's Manual page 30

5. While holding the rear of the seat up, roll the seat out
of the vehicle.
4. Pull on the release strap
located in the lower
middle of the seat to
unlatch the seat from the
floor and pull the seat
out. Use one hand to
pull the release strap and
the other on the handle
to pull the seat out.
Replacing the Full Bench Seat (Third Row)
CAUTION:
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
CAUTION:
A seat that isn't locked into place properly can
move around in a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
1-23