Caller Id Service; Using Caller Id Service - Panasonic KX-TG6541BX Operating Instructions Manual

TG654xBX(e).book Page 28 Tuesday, June 28, 2011 10:16 AM

Caller ID Service

Using Caller ID service

Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
Caller ID features
When an outside call is being received,
the caller's phone number is displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
L If the unit cannot receive caller
information, the following is displayed:
– "Out of area": The caller dials
from an area which does not
provide a Caller ID service.
– "Private caller": The caller
requests not to send caller
information.
L If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
L If the name display service is available
in your area, the display shows caller
names. For further information,
please contact your service provider/
telephone company.
Missed calls
If a call is not answered, the unit treats it
as a missed call. The display shows
"Missed call". This lets you know if
you should view the caller list to see who
called while you were away.
Note:
L Even when there are unviewed
missed calls, "Missed call"
disappears from the standby display if
28
the following operation is performed
by one of the registered handsets:
– Being replaced on the base unit or
charger.
– Pressing {OFF}.
Phonebook name display
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Talking Caller ID
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to Caller ID service of your
service provider/telephone company.
– turn this feature on (page 23).
When caller information is received, the
handsets and base unit announce the
caller's phone number received from
your service provider/telephone
company following every ring.
The unit announces in English only.
L The announcement is heard at the
same level as the ringer volume (page
14, 22).
L If you turn on the answering system
and set the number of rings "2
rings" (page 36), the unit does not
announce the caller information. If
"Toll saver" is selected and there
is a new message, the unit does not
announce the caller information.
L When you receive a call while on the
phone, the 2nd caller's information is
not announced even if you subscribe
to both Caller ID and Call Waiting with
Caller ID services.
Phonebook name announcement
When caller information is received and
it matches a phone number stored in the