Table of Contents
Advertisement
RTP
Have a setting for sending and receiving an audio or video on a real-time basis. These settings are the
IP address, port number, and Time-To-Live value to use for the media stream(s) in multicast H.264
format. Only certain IP addresses and port numbers should be used for multicast streams. For more
information, please see the online help.
•
Port Range
-
Start port: Enter a value between 1024 and 65532
•
Multicast(Stream1/Stream2/Stream3)
This function is for sending Video and Audio to Multicast group.
-
Enable Multicast: Check the checkbox to enable multicast operation.
-
Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255. Although
it is empty, an IP will be entered automatically.
-
RTP port: Enter a value between 1024 and 65532.
-
RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower
value. On the other hand, if a network status is poor, enter a higher value. When there are
many Network Cameras or users, a higher value may cause a heavy load to the network.
For a detailed setting, please consult with a network manager.
59
Advertisement
Table of Contents
