1. Manuals
  2. Brands
  3. Revo Manuals
  4. Security Camera
  5. Elite RESPTZ37-1
  6. Instruction manual

Revo Elite RESPTZ37-1 Instruction Manual

37x speed dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elite RESPTZ37-1 and is the answer not in the manual?

Questions and answers

Related Manuals for Revo Elite RESPTZ37-1

Summary of Contents for Revo Elite RESPTZ37-1

  • Page 2: Warnings And Cautions

    Warnings and Cautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...

  • Page 3: Fcc Compliance

    FCC COMPLIANCE FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

  • Page 5: Table Of Contents

    1.1 Features ..............................1 Chapter 2 — Installation and Configuration ................3 2.1 Package Contents ........................... 3 2.2 Basic Configuration of REVO TRAX Dome Camera System ..............4 2.3 Setting Dome Camera Termination ......................5 2.4 Fail-safe Network ............................ 6 2.5 Setting Dome Camera Address (ID) .......................
  • Page 6 3.13 Camera Menu type 2 ........................... 26 Focus Control .............................. 26 WB (White Balance) Control ........................27 AE Control ..............................27 Line Lock Control ..........................28 3.14 Camera Menu type 3 ........................... 29 Focus Control .............................. 29 WB (White Balance) Control ........................30 AE Control ..............................

  • Page 7: Chapter 1 - Introduction

    Chapter 1 — Introduction 1.1 Features The REVO TRAX dome camera and the keyboard controller make up the building blocks for any surveillance/security system. Using multiple Keyboard Controllers and multiple dome cameras, no place is too large for monitoring. Extensible and flexible architecture facilitates remote control functions for a variety of external switching devices such as multiplexers and DVRs.
  • Page 8 Note: It is recommended to remove camera window for improving picture quality when you use bubble ring ass’y. CAUTION : When installing a REVO TRAX dome on a high pole outside, caution should be taken to avoid vibration and shaking of REVO TRAX dome due to wind load or shock of passing heavy vehicles.

  • Page 9: Chapter 2 - Installation And Configuration

    2.1 Package Contents The package contains the following. REVO TRAX (Dome Camera) ………………………1 Bubble Ring ………………………1(Optional) Instruction Manual (This Document) ………………………1 Assembly Screws for Attaching REVO TRAX ………………………3 Plastic Anchor ………………………3 10Pin Connector ………………………1 12Pin Connector ………………………2 CAUTION: Be sure to have caution labels (E version only) on both the body and the base of the camera.

  • Page 10: Basic Configuration Of Revo Trax Dome Camera System

    2.2 Basic Configuration of REVO TRAX Dome Camera System Figure 4 – Basic installation diagram The dome camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes. The system should be installed according to...

  • Page 11: Setting Dome Camera Termination

    Figure 5 – Layout of Switches 2.3 Setting Dome Camera Termination The device which is connected at end of line, whether it be a dome camera or keyboard controller, must have the cable for communication terminated by setting the appropriate DIP switch.

  • Page 12: Fail-Safe Network

    2.4 Fail-safe Network When you control the dome by the other device not own keyboard, some error may be existed in the serial communication. The reason is caused by the other device without the fail-safe network. At this time, you solve the problem to set this DIP switch to ON of the nearest dome from the other device only.

  • Page 13: Setting Dome Camera Address (Id)

    2.5 Setting Dome Camera Address (ID) To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras using a multiplexer, it is suggested that the dome camera address match the multiplexer port number. If you want to set the address more than 999, you should contact the service provider. Example: Port 1 = Dome 1, Port 2 = Dome 2 …...

  • Page 14: Setting Dome Camera Protocol

    Enable Disable Alarm S4-2 NTSC NTSC/PAL S4-3 Reserved S4-4 RS-422 RS-485 RS-422/RS-485 ROTOCOL S5-1 S5-2 S5-3 S6-4 F2,REVO TRAX, Pelco-D,Pelco-P: default F2,REVO TRAX Sensormatic RS422 Pelco-D, Pelco-P Vicon Ernitec Reserved Philips(Bosch) Reserved Dynacolor Reserved S5-4 S6-1 S6-2 2400 bps 4800 bps...

  • Page 15: Connections

    2.7 Connections • Connecting to the RS485/ 422 The dome camera can be controlled remotely by an external device or control system, such as a control keyboard, using RS485 half-duplex, RS422 full duplex or simplex serial communications signals. Connect Marked Tx+, Tx- to Tx+(Rx+) and Tx-(Rx-) of the RS485 control system.

  • Page 16: Getting Started

    2.8 Getting Started Once installed apply power to the dome camera. The dome camera will start a configuration sequence. PRESET TITLE AREA TITLE STATUS of AF AE FUNCTION FOCUS and AE UNDER RUNNING CAMERA TITLE EMPTY DATA INFORMATIO N DISPLAY CAMERA ID DOMEID:0001 PAN &...

  • Page 17: Chapter 3 - Program And Operation

    Chapter 3 — Program and Operation 3.1 Dome Camera Selection Before you program or operate a dome camera, you must select the dome camera by pressing the dome camera No. + CAM Example: Pressing 1 , 0 and CAM key sequentially will select dome camera 10. The selected dome camera ID will be displayed on the LCD monitor of the keyboard controller.

  • Page 18: How To Control On-Screen Menu Utility

    3.3 How to control the On-Screen Menu Utility Function Button Call the On-screen menu utility MENU Navigate through the menu items. Joystick up or down Joystick left or right Go into the sub-menu items. or IRIS Open Joystick left or right or Change value.
  • Page 19 : Set the scan direction, CCW(Counter Clock Wise), CW(Clock Wise) SCAN DIR : Swap the start point for the end point. SWAP : Set the dwell time at the both end, 01 – 99 seconds DWELL 1. Press the SCAN key to enter the auto scan menu directly. Or press the MENU key to display the main menu on the monitor.

  • Page 20: Preset

    10. Set “DWELL TIME”. 11. Select Save and Exit and push the Joystick to the right or press IRIS Open . Press ESC or IRIS Close to exit the program without saving. Pressing the HOME key delete stored data at the angle field. To set the position using the preset position: a.
  • Page 21 PRESET SETUP NUMBER : 001 TITLE : --- CAMERA SET DWELL : --- SEC 12345678901234567890 00 █**----------------- 02 -------------------- 04 -------------------- 06 -------------------- NEXT PAGE SAVE AND EXIT(ESC TO CANCEL) - : blank preset position * : position has the preset █...
  • Page 22 MOTION SETUP SENSITIVITY : 12 POSITION : ALL DELAY : 00 SEC OUTPUT : OFF HOLD TIME : 03 SEC EXIT(ESC TO EXIT) Set SENSITIVITY: 1~10(22X model) / 1~15(36X model) Set POSITION: ALL, CENTER Set DELAY: 0~5 SEC Set OUTPUT: OFF, OUT1 Set HOLD TIME: 3~99 SEC Select “AE SETUP”...

  • Page 23: Shortcut Preset Program

    3.6 Shortcut of Preset Program After selecting the desired scene, press No. ( 1 to 240 ), and press CTRL and PRST subsequently. The current view will be stored to the selected preset number if the preset number is empty. If selected preset number is not empty, “ OVER WRITE ” message will be displayed on the monitor and select the “OK”...

  • Page 24: Pattern

    5. To place functions other than preset, press TOUR , PTRN , or SCAN for Tour, Pattern or Auto Scan respectively. 6. You can also overwrite the programmed number and to remove a stored number from the Tour, press the HOME key on the stored number, a blank position mark (---) will be displayed.

  • Page 25: Alarm

    Follow steps below to program the Pattern: 1. Press MENU to display the main menu on the monitor. Scroll to Pattern and push the Joystick to the right to enter the pattern menu. Or just press the PTRN key on the keyboard.
  • Page 26 : Alarm input number : The lower number has higher priority. (0-8) PRI(Priority) FUN(function) : Stored function number to be called by alarm. : NO/NC - normally open /Closed OFF - ignore : OUT1~OUT4 - Relay out 1,2,3,4, OFF - No output. : Alarm will be held for programmed time (03 to 99 seconds) HLD(HOLD) : ON - Shows all alarms including past alarm.

  • Page 27: Area Title

    3.10 Area Title Enter a specific name on programmed angle between START and END. For the screen below, when the camera points at an angle between 124.3 ° (PAN), 30.7 ° (TILT) to 359.5 ° (PAN), 45.4 ° (TILT), ABC will be displayed on the screen. AREA TITLE SETUP NUMBER : 01...

  • Page 28: Privacy Zone

    3.11 Privacy Zone Hide up to 8 unwanted scenes in a camera. PRIVACY ZONE SETUP (CTRL KEY) TITLE METHOD 01 ABC BLOCK 02 DEF V.OFF ---- ---- ---- ---- ---- ---- SAVE AND EXIT(ESC TO CANCEL) 1. Place the cursor at the title field. 2.

  • Page 29: Camera Menu Type 1

    3.12 Camera Menu Type 1 NOTE: The features will vary depending on the camera module installed in your dome camera. CAMERA SETUP FOCUS CONTROL WB CONTROL AE CONTROL LINE LOCK CONTROL CAMERA CONTROL EXIT(ESC TO EXIT) • FOCUS CONTROL FOCUS SETUP MODE : AUTO AF SENSITIVITY...

  • Page 30: Ae Control

    0 ~ 255 RGAIN 0 ~ 255 BGAIN RGAIN / BGAIN modes are controllable only in MANUAL Mode • AE CONTROL AE SETUP MODE : MANUAL SLOW SHUTTER : --- IRIS : F5.6 GAIN : 0 DB BRIGHT : AUTO SHUTTER : 1/60 BACK LIGHT...

  • Page 31: Line Lock Control

    The slow response function allows you to lengthen the automatic exposure response speed from 1 up to 32 times. For example, with the normal setting (about 1 second), if the headlights of a car are caught by the camera, the camera automatically adjusts the exposure so that it can shoot a high-intensity subject (in this case, the headlights).

  • Page 32: Camera Menu Type 2

    3.13 Camera Menu Type 2 NOTE: The menu features will vary depending on the camera module installed in your dome camera. CAMERA SETUP FOCUS CONTROL WB CONTROL AE CONTROL DNR CONTROL LINE LOCK CONTROL SHARPNESS : 05 RESOLUTION : MID DIGITAL ZOOM : OFF IMAGE FLIP...

  • Page 33: Wb (White Balance) Control

    • WB (White Balance) CONTROL WB SETUP MODE R GAIN B GAIN SAVE AND EXIT(ESC TO CANCEL) AWB / WAWB / INDOOR / OUTDOOR / MANUAL MODE Computes the white balance value output using color information from the entire screen automatically. (2500 to 9500 °K) WAWB Wide range auto white balance mode.(1800 to 10500 °K) INDOOR...

  • Page 34: Line Lock Control

    10~50 WDR LEVEL AUTO / ON / OFF / GLOBAL NIGHT SHOT NOTE: Values in ( ) are for PAL Camera. NOTE: The WDR operates in AUTO1 mode only. The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera sensitive to near infrared.

  • Page 35: Camera Menu Type 3

    CAMERA SETUP FOCUS CONTROL WB CONTROL AE CONTROL LINE LOCK CONTROL SHARPNESS : AUTO DIGITAL ZOOM : OFF IMAGE FLIP : OFF PRESET FREEZE : OFF AGC LIMIT : 25 IMAGE STABLIZATION: OFF SAVE AND EXIT(ESC TO CANCEL) The higher the value, the more edges in the picture will be SHARPNESS enhanced (AUTO/0~31) OFF : Zoom range is limited to the optical.

  • Page 36: Wb (White Balance) Control

    WB SETUP MODE AUTO R GAIN B GAIN SAVE AND EXIT(ESC TO CANCEL) AUTO / MANUAL MODE MANUAL Control of R and B gain AUTO Computes the white balance value output using color information from the entire screen automatically. (2800 to 8000 °K) 0 ~ 255 RGAIN 0 ~ 255...
  • Page 37 darken the scene. This is helpful when the scene is too bright or too dark. Set the effect of focusing peak, or how video peaks affect the overall IRIS PEAK picture brightness. (000-127, default :016) When the scene have bright lights such as spotlight or headlight, if you set Iris peak level high, the image get dark because of the effect of focusing peaks.

  • Page 38: Line Lock Control

    LINE LOCK SETUP MODE INTERNAL PHASE SAVE AND EXIT(ESC TO CANCEL) MODE INTERNAL / EXTERNAL PHASE Adjusts phase of picture with other cameras in EXTERNAL mode.( 0~255) 3.15 Camera Menu Type 4...

  • Page 39: Focus Control

    CAMERA SETUP FOCUS CONTROL WB CONTROL AE CONTROL LINE LOCK CONTROL SHARPNESS : 34 DIGITAL ZOOM : OFF IMAGE FLIP : OFF PRESET FREEZE : OFF STABILIZATION : OFF : MIDDLE MOVING DNR : LOW SAVE AND EXIT(ESC TO CANCEL) 0~64, The higher the value, the more edges in the picture will be SHARPNESS enhanced...

  • Page 40: Wb (White Balance) Control

    • WB (White Balance) CONTROL WB SETUP MODE AUTO R GAIN B GAIN SAVE AND EXIT(ESC TO CANCEL) AUTO / INDOOR / OUTDOOR / AWB / MANUAL MODE AUTO Wide range auto white balance mode.(1700 to 11000 °K) INDOOR Indoor white balance mode. OUTDOOR Outdoor white balance mode.

  • Page 41: Line Lock Control

    Wide Dynamic Range function on WDR.ACE Wide Dynamic Range function wite ACE function ACE can clearly distinguish objects Note: WDR and WDR.ACE are available when mode is AUTO or IRIS PRIO mode, and when shutter is fixed to A.FLK.. Backlight compensation function on HSBLC Highlight Suppress BLC function on.

  • Page 42: Dome Setup

    3.16 Dome Setup CONFIGURATION MENU LANGUAGE : ENGLISH HOME FUNCTION SETUP OSD DISPLAY VIEW ANGLE SETUP INITIALIZE DATA ORIGIN OFFSET DOME RESET SYSTEM MENU SYSTEM INFORMATION SAVE AND EXIT(ESC TO CANCEL) • LANGUAGE SETUP LANGUAGE : Select the language you want. •...

  • Page 43: Osd Display

    • OSD DISPLAY OSD DISPLAY SETUP CAMERA TITLE : DOMEID VIEW DIRECTION : OFF DOME OSD : ON AREA TITLE : OFF PRESET TITLE : CONSTANT FOCUS EXPOSURE : ON OSD POSITION SETUP SAVE AND EXIT(ESC TO CANCEL) : up to 6 characters. CAMERA TITLE : ON / OFF VIEW DIRECTION...

  • Page 44: View Angle Setup

    • VIEW ANGLE SETUP VIEW ANGLE SETUP PANNING RANGE FLIP : 90° TILT OVER ANGLE : ON SAVE AND EXIT(ESC TO CANCEL) FLIP : OFF,90 ° ,100 ° ,110 ° ,120 ° ,AUTO(18X,26X,36X MODEL) : ON,OFF(22X MODEL) OFF: the dome camera moves until 90 ° vertically. 90°, 100°, 110°, 120°: allows the image to flip digitally when the camera moves over the setting angle vertically.

  • Page 45: Initialize Data

    PANNING RANGE When the dome camera is installed near a wall, panning range can be limited by user. PANNING RANGE SETUP (CTRL KEY) RIGHT LIMIT : 000.0 LEFT LIMIT : 000.0 ENABLE : OFF SWAP : OFF AUTO PAN : OFF SAVE AND EXIT(ESC TO CANCEL) 1.
  • Page 46 FACTORY DEFAULT ARE YOU SURE ? CANCEL ERASE PROGRAMMED DATA Erase all stored data from the Flash-ROM of the selected dome camera. You will be asked to enter ON or OFF. If you desire to erase all data then select the Erase Run, otherwise press the ESC key to exit without erasing.

  • Page 47: Origin Offset

    • ORIGIN OFFSET OFFSET SETUP (CTRL KEY) PAN OFFSET : 000.0 TILT OFFSET : 000.0 ENABLE : OFF SAVE AND EXIT(ESC TO CANCEL) This feature is useful to align a new dome camera exactly the same as the previously installed dome camera. Dome camera’s origin set and all data initialize option do not override offset values.
  • Page 48 DOME ANSWER : ON SAVE AND EXIT(ESC TO CANCEL) : ON (Auto origin check) / OFF CALIBRATION : ON (requires the password to enter menu) / OFF PASSWORD ENABLE : ON(5mintues) / OFF( always menu display) MENU TIME OUT ; ON / OFF(no blinking cursor) BLINK CURSOR ;...

  • Page 49: System Information

    ORIGIN CHECK When you find the wrong position of the dome during operation, execute this origin check and the dome camera will arrange the right position after the origin check operation. Pressing 151 + ON will execute the origin check. ORIGIN CHECK ARE YOU SURE ? CANCEL...

  • Page 50: Function Run

    EXIT(ESC TO EXIT) The system information provides essential information about the dome camera if service is required. When you view this screen, you can determine the camera type, ROM version. The information on this screen cannot be modified. 3.17 Function Run This Function Run menu allows you to execute the function when you use a keyboard or a DVR without the function keys (Preset, Pattern, Tour and scan).

  • Page 51: Motion Setup Type 1(28X, 36X Model)

    Note: To execute the function, you should save the function (PRESET, PATTERN, TOUR, and SCAN) first. - HOME Select the HOME menu and press CTRL key. Then dome camera goes to the default position to which the dome camera returns after an assigned period of inactivity passes. The default position may be a Preset, Tour, Pattern or no action.

  • Page 52: Motion Setup Type 2 (22X Model Only)

    MOTION SETUP SENSITIVITY : 12 POSITION : ALL DELAY : 00SEC OUTPUT : OFF HOLD TIME : 03SEC EXIT(ESC TO EXIT) SENSITIVITY : 1-15 : ALL,CENTER(the center box displays): motion detection area. POSITION : 00-05SEC : The delay time is used to make adjustments for scenes that DELAY have sudden changes such as lights and shadows created by headlights of nearby traffic.

  • Page 53: Motion Setup Type 3 (35X Model Only)

    MOTION SETUP SENSITIVITY : 12 POSITION : ALL DELAY : 00SEC OUTPUT : OFF HOLD TIME : 03SEC EXIT(ESC TO EXIT) SENSITIVITY : 1-10 : ALL,CENTER(the center box displays): motion detection area. POSITION : 00-05SEC : The delay time is used to make adjustments for scenes that DELAY have sudden changes such as lights and shadows created by headlights of nearby traffic.

  • Page 54: Motion Setup Type 4 (28X, 37X Model)

    MOTION SETUP SENSITIVITY : 05 POSITION : 01 DELAY : 00SEC OUTPUT : OFF HOLD TIME : 03SEC EXIT(ESC TO EXIT) SENSITIVITY : 1-5 : motion detection area.(1-3) POSITION : 00-05SEC : The delay time is used to make adjustments for scenes that DELAY have sudden changes such as lights and shadows created by headlights of nearby traffic.
  • Page 55 MOTION SETUP SENSITIVITY : 07 POSITION : ALL DELAY : 00SEC OUTPUT : OFF HOLD TIME : 03SEC EXIT(ESC TO EXIT) SENSITIVITY : 1-10 : ALL,CENTER(the center box displays): motion detection area. POSITION : 00-05SEC : The delay time is used to make adjustments for scenes that DELAY have sudden changes such as lights and shadows created by headlights of nearby traffic.

  • Page 56: Appendix A - Specifications

    Appendix A — Specifications 37x Optical Zoom REVO TRAX Dome System MODEL Camera Menu Type MODULE 4.5mm (1/4 inch 960H Dual Scan CCD ) CCD Type Optical / Digital Zoom 37X / 12X 650TVL Resolution (NTSC/PAL) 3.5mm~129.5mm Focal length 3.5mm-54.4°(H) Angle of view 129.5mm-1.6°(H)
  • Page 57 Alarm Output 4 Normal relays 24VDC/1A Max. (selectable NC/NO) Alarm Input 8 Normal dry contact (selectable NC/NO) RS-485/422 baud rate: 2400~38.4k bps Control (default: 9600bps) ID (Camera Address) 999 (3999 by software setting) Mechanical Dimension See Figure below Weight Approx 1.2 kg 360 °...

  • Page 58: Appendix B - Troubleshooting

    Appendix B — Troubleshooting If problems occur, verify the installation of the camera with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information. Problem Possible Solution Verify that power is connected to all pieces of...

  • Page 59: Appendix C - Glossary

    Appendix C — Glossary Alarm Actions The assigned responses for the dome camera when inputs change from normal to abnormal states. The dome may run a Preset, Pattern, or have no assigned action for each of the four dome inputs. The dome may also send alarm states to the host controller for processing. See also Input and Normal Input State.

  • Page 60: Line Lock

    IR Mode A feature of the camera that permits manual or automatic switching between color and IR (black-and-white) operation. When IR mode is active, clearer images may be obtained under low-light conditions. Line Lock Allows you to phase lock the video with the AC power line. When line lock is enabled, it prevents vertical video rolling when switching multiple cameras to a single monitor.

  • Page 61: Privacy Zones

    Privacy Zones Masked areas of the dome camera's viewing area. These masks prevent operators of the surveillance system from viewing these designated zones. The Privacy Zones move in relation to the dome camera’s pan/tilt position. In addition, the apparent size of the Privacy Zone adjusts automatically as the lens zooms in or out.
  • Page 62 Appendix D — Short Cut Key Short Cut Key Function Pop up preset setup menu. PRST Pop up Tour setup menu. TOUR Pop up Pattern setup menu. PTRN Pop up Auto Scan setup menu. SCAN NO. + PGM Store the current view at the selected number. + PRST Short Cut Key Function...

  • Page 63: Appendix D - Short Cut Key

    Short Cut Key Function Short Cut Key Function Go to the normal speed Go to the slow speed mode 153 + ON 153 + OFF mode Display System Information 154 + ON Flip the camera in the 180° area horizontally. 155 + ON Set the dome ID up to 3999 250 + PRESET...
  • Page 64 - MEMO -...

Table of Contents