AE & AWB
This page provides access
•
Exposure Control
Configure the exposure settings to suit the image quality requirements in relation to lighting
consideration.
-
Mode: Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto with DC-IRIS.
*
Automatic: Automatically sets the amount of light detected by the DC-IRIS and AGC.
*
Hold Current: Fixes the exposure at its current state.
-
Value: Select a value in the drop-down list to tune the exposure. The default setting is 3.
-
Enable automatic IRIS adjustment: This checkbox should always be set to be checked,
except during focusing, or when using a fixed iris lens.
-
Flicker Mode - Provides the options for flicker.
*
50Hz: Select at 50 Hz environments.
*
60Hz: Select at 60 Hz environments.
to set the exposure and white balance of the network camera.
30