Table of Contents
Advertisement
Audio Recorder
To use the Audio Recorder tool to make an audio file for Audio Alert function, you must install the
Revo Remote Pro HD program on the installation CD at first.
To run the Audio Recorder program go to (Start>All Programs> Revo Remote Pro HD
>Tools>ARecorder) in your PC, the ARecorder window will be displayed as below.
The description of each button in the ARecorder window is as follows:
Open: Open an audio file.
Capture: Capture audio from the microphone in your PC.
Save: Save a captured file to your PC. (PCM format)
Encode: Encode a current capture file or opened PCM file to G.711 file for Audio Alert.
Play: Play a current audio file.
Stop: Stop playing audio.
Procedures to make an audio file in G.711 format for Audio Alert.
1.
Connect the microphone in your PC.
2.
Click the Capture button and talk to the microphone to record the audio or voice.
You can record up to 30 seconds. Click the Stop button to stop remove capturing.
3.
Click the Save button and then set the file name to save a current capture file with PCM format.
If you don't need to make the PCM file, skip this step and then go to the step 5 directly.
4.
Click the Open button and then select the file name to open an audio file in PCM format.
5.
Click the Encode button to encode the current audio file to G.711 format for Audio Alert.
Set the file name and encode parameters.
Caution: All parameters must be synchronized with the ones in the audio setting page of the network
devices for a proper operation.
45
Advertisement
Table of Contents
