Table Of Contents - Chelsio Communications Chelsio T5 User Manual

I. CHELSIO UNIFIED WIRE
1. Introduction
1.1. Features
1.2. Hardware Requirements
1.3. Software Requirements
1.4. Package Contents
2. Hardware Installation
3. Software/Driver Installation
3.1. Pre-requisites
3.2. Installing Chelsio Unified Wire from source
3.3. Installing Chelsio Unified Wire from RPM
3.4. Firmware update
4. Software/Driver Uninstallation
4.1. Uninstalling Chelsio Unified Wire from source
4.2. Uninstalling Chelsio Unified Wire from RPM
5. Configuring Chelsio Network Interfaces
5.1. Configuring 40G adapters
5.2. Configuring network-scripts
5.3. Creating network-scripts
5.4. Checking Link
6. Software/Driver Update
II. NETWORK (NIC/TOE)
1. Introduction
1.1. Hardware Requirements
1.2. Software Requirements
2. Software/Driver Loading
2.1. Loading in NIC mode (without full offload support)
2.2. Loading in TOE mode (with full offload support)
3. Software/Driver Unloading
3.1. Unloading the NIC driver
3.2. Unloading the TOE driver
4. Software/Driver Configuration and Fine-tuning
4.1. Instantiate Virtual Functions (SR-IOV)
4.2. Performance tuning
III. VIRTUAL FUNCTION NETWORK (VNIC)
1. Introduction
1.1. Hardware Requirements
Chelsio T5/T4 Unified Wire For Linux

TABLE OF CONTENTS

12
13
13
14
14
14
17
20
21
21
32
35
36
36
40
42
42
43
44
45
46
47
48
48
49
50
50
50
51
51
51
52
52
52
58
59
59
iv