Hardware Requirements; Software Requirements; Package Contents - Chelsio Communications Chelsio T5 User Manual

Chapter I. Chelsio Unified Wire
WD-UDP
WD-TOE
iSCSI PDU Offload Target
iSCSI PDU Offload Initiator
Data Center Bridiging (DCB)
FCoE PDU Offload Target
FCoE full offload Initiator
Offload Bonding driver
Offload Multi-Adapter Failover(MAFO)
UDP Segmentation Offload and Pacing
Offload IPv6 driver
Bypass driver
Classification and Filtering feature
Traffic Management feature (TM)
Unified Wire Manager (UM)
Unified Boot Software
Lustre File System
Utility Tools(cop,cxgbtool,t4_perftune,benchmark tools, sniffer & tracer)
libs (iWARP and WD-UDP libraries)
For detailed instructions on loading, unloading and configuring the drivers/tools please refer to
their respective sections.
1.2.

Hardware Requirements

The Chelsio Unified Wire software supports Chelsio T5 and T4 Series of Unified Wire Adapters.
To know more about the list of adapters supported by each driver, please refer to their
respective sections.
1.3.

Software Requirements

The Chelsio Unified Wire software has been developed to run on 64-bit Linux based platforms
and therefore it is a base requirement for running the driver. To know more about the complete
list of operating systems supported by each driver, please refer to their respective sections.
1.4.

Package Contents

1.4.1. Source Package
The Chelsio Unified Wire source package consists of the following files/directories:
Chelsio T5/T4 Unified Wire For Linux
Page 14