Chelsio Communications Chelsio T5 User Manual page 350

XX. Unified Wire Manager (UM)
Targets
The iSCSI targets that have been discovered, or are currently connected, are listed here. You
may login, logout and delete the target from the initiator's configuration. In Windows, for the
Microsoft iSCSI initiator, connections to an already established iSCSI session can be added or
deleted. For the Microsoft iSCSI initiator or the Open iSCSI initiator, you may specify the
authentication details and digest settings while logging in. For Chelsio Linux initiator, these
settings should be set prior to attempting a login, in the Initiator nodes module. If a target is
connected, the sessions and connections to the target, and the disks provided by the target will
be listed.
In Windows, you can specify the initiator HBA to use and its IP address while logging in.
Figure 7.7.2 (f) - Targets module after logging in
Chelsio T5/T4 Unified Wire For Linux
Page 350