Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Bosch PDA 180 User Manual

Maintenance and Cleaning

Before working on machine disconnect from
power supply by removing plug from socket.
Always keep the machine and the ventilation slots
clean.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Bosch power tools.
For all correspondence and spare parts orders, al-
ways include the 10 digit order number from the
nameplate of the machine!
WARNING! Important instructions for connect-
ing a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the earth
terminal of the plug.
Important: If for any reason the moulded plug is re-
moved from the cable of this machine, it must be dis-
posed of safely.

Environmental Protection

Recycle raw materials instead of dis-
posing as waste
The machine, accessories and packag-
ing should be sorted for environmental-
friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Noise/Vibration Information
Measured values
EN 50 144.
Typically the A-weighted sound pressure level of the
tool is 80 dB (A). The noise level when working can
exceed 85 dB (A).
Wear ear protection!
The typically weighted acceleration is 3 m/s
To be fitted
by qualified
professional only
determined according
2
.
Subject to change without notice
Service and
Customer Assistance
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
.................................
Advice line
..........................
Fax
.................................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
.......................................
Fax
.......................................................
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
...................................................
Fax
...................................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
.........................................................
Fax
.........................................................

Declaration of Conformity

We declare under our sole responsibility that this
to
product is in conformity with the following standards
or standardisation documents: EN 50 144 according
to the provisions of the directives 89/336/EEC,
98/37/EC.
Dr. Gerhard Felten
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
Dr. Eckerhard Strötgen
9