Controlling What You See; Selecting And Adjusting A Camera Or Other Video Source; Setting And Using Camera Presets; Configuring The Automatic Self View Control - Polycom Group 700 Quick Manual

Controlling What You See

Selecting and Adjusting a Camera or Other Video Source

To select a near-end or far-end camera, or other video source:



To adjust a camera using the remote control:




Setting and Using Camera Presets

To view stored presets:

To move the camera to a stored preset:
1. If you are in a call, press Select on the remote control to switch between a near-end
2. Press a number on the remote control.
To store a preset using your remote control:
1. If you are in a call, press Select to choose Your or Their camera.
2. Press
3. Press the directional buttons to move the camera up, down, left, or right.
4. To store a preset position, press and hold a number from 0 to 9 for five seconds.

Configuring the Automatic Self View Control

To turn Self View on and off during a call:
1. With your remote control, select
2. Select On to display the Self View of the near-end site in a call or Off to hide the Self
INSTRUCTIONAL
TECHNOLOGY
Select > Cameras. Then select Your Cameras for near-end control or Their
Cameras for far-end control.
To switch between Your Cameras and Their Cameras without accessing the menu,
press Select on the remote control while in a call.
To return to a previous screen after adjusting your or their camera settings, select
.
Select either a near-end or far-end video source to control. During a multipoint call
being hosted by a system in the call, you can only adjust a camera at the far end that
has a current speaker.
Press the navigation buttons on the remote control to move the camera up, down,
left, or right.
On the remote control, press
Using your remote control, press
Cameras > Presets. Icons for presets 0-9 are shown on the screen. A snapshot above
the number means that a preset has been assigned to that number. An empty box
means that no preset has been assigned to that number.
site (Your Camera) or far-end site (Their Camera) camera.
or to zoom the camera out or in.
View.
Polycom Group 700
to zoom out or to zoom in.
and then on the local interface, navigate to
> Self View.
Quick Guide