Page 1
The Polycom™ Remote Controller Place or Answer a call End a call Adjust camera/Navigate menus Confirm menu selection/perform functions on highlighted items Return to Home Screen Return to previous screen Increase/decrease sound YOU hear Select Far site camera/video source Zoom in/out...
Camera Control You can use the remote control to select the main camera or any other near-site video sources, such as document cameras, laptops, VCRs or DVD players. 1. If you are in a call, press Near to select your video sources.
The image from the camera or video source you selected appears on the screen. Press the arrow buttons on the remote control to move the camera up, down, to the left, or to the right. Press Zoom to zoom out or in.
Adjusting Volume: Use the remote control to raise or lower the volume of the sound you hear. Changing the volume affects only the sound you hear at your site. You cannot adjust your outgoing audio. If the other sites have turned up their volume and your audio level is low, check...
Page 5
2. Position your document or object in the document camera or insert the videotape or DVD. To start showing a document, object, videotape, or DVD in a call: 1. Press Camera on the remote control. 2. Select a video source. 3. Press on the remote control.
Page 6
IF YOU ARE EXPERIENCING VIDEO PROBLEMS, TECHNICAL SUPPORT IS AVAILABLE AT THE FOLLOWING NUMBERS: TROUBLE LINE: 1-800-567-8345 Available during scheduled conferences DDN: 605-773-3333 Available Monday – Friday 8:00 am to 5:00 pm...
Need help?
Do you have a question about the Remote Control and is the answer not in the manual?
Questions and answers